TO VIEW SWIRL FLAP DELETE KIT FOR SAAB FIAT ALFA ROMEO 1.9 JTD/TTID INTAKE MANIFOLD, CLICK HERE

1. Unscrew the swirl flap actuator and the plastic cover from the control mechanism, to facilitate
access for disassembling the swirl flaps

2.As the mechanism that controls the operation of the rotating fin is made of plastic, very often
It happens that the toothed bar and the gears are damaged.

3. Unscrew the plastic part of the manifold from the aluminum part and separate both parts.

4. Remove the swirl flaps and then wash your manifold and carefully clean all the holes left after
disassembling the swirl flaps

5. Insert the plugs with a small press or a small hammer, being careful not to damage the manifold. Do not remove the swirl flap seals that additionally seal the connection.

6. Reassemble the manifold with the tumble flap actuator and bracket in place.

7. Assemble the manifold according to the manufacturer’s instructions.