TO VIEW THE SWIRL FLAP DELETE KIT FOR OPEL SAAB FIAT 2.0 CDTI JTDM 16V MANIFOLDS, CLICK HERE

1. Unscrew the swirl flap actuator and control rod.

2. Remove swirl flaps with a sharp tool

3. Clean the manifold and thoroughly clean the holes where the swirl flaps were removed.

4. Mount the plugs by twisting and pressing them at the same time. The O-ring should be covered with oil
for easier installation. Screw in the plugs with the included screws.

5. Reinstall the manifold according to the manufacturer's instructions, leaving the swirl flaps and bracket in place,
but the lever arm disconnected