SEAT OCCUPANCY SENSOR EMULATOR SRS / AIRBAG MAT MERCEDES BENZ WITH LIN COMMUNICATION W176 W246 W204 W205 C117 W212 W463 W292 W166 R172 X156 C218

MERCEDES BENZ SEAT OCCUPANCY SENSOR EMULATOR – PASSENGER

Has your airbag or seatbelt warning light come on? Do you need to pass your vehicle inspection (ITV)? We have the solution to your problem. With our passenger seat occupancy sensor emulator, you can fix the fault yourself, affordably and safely.

ONLY FOR VEHICLES WITH LIN COMMUNICATION

Compatible MERCEDES BENZ cars:

A-CLASS W176 (2012- 2018)

B-CLASS W246 (2011-2019)

C-CLASS W204 (2007-2015)

C-CLASS W205 (2015-2021)

CLA-CLASS C117/X117 (2013-2019)

E-CLASS W212, S212, C207, A207 (2009-2016)

G-CLASS W463 (2007-2018)

GLE-CLASS W292, C292 (2015-2019)

M-CLASS - ML - W166 (2011-2015)

SLK-CLASS R172 (2011-2020)

CLS-CLASS C218 (2014-2018)

GLA-CLASS X156 (2013-2019)

INSTALLATION INSTRUCTIONS: 

The seat mat connector and the seat belt buckle connector are located under the passenger seat on the yellow wiring harness. At the front of the wiring harness there is a large yellow connector with some wires (see Photo 1). DO NOT disconnect that connector. It needs to remain connected at all times. At the back of the wiring harness there are four connectors. These are the connectors you are interested in.

Photo 1. LEFT: front side of the wiring harness (DO NOT disconnect that connector). RIGHT: back of the wiring harness (this is where you connect the emulator)

Photo 2. This photo shows the wiring harness from the top. The front and back are clearly visible.

Photo 3. the seat belt buckle (marked as 1) and the seat mat (marked as 2).
Both seat mat connectors are the same and require the same emulator. Mercedes just changed the wire colors at some point.